It is currently Sat Sep 26, 2026 6:08 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: FYI: ex-SR SD-40's going to scrap
PostPosted: Thu May 10, 2012 8:31 am 

Joined: Thu Jan 12, 2006 10:10 pm
Posts: 670
Location: Iron City
There are (2) ? ex-SR SD-40's going to scrap at a scrapper located in Cresson, PA.

DPK

_________________
"Two wrongs don't make a right, but they make a good excuse."-Thomas Szasz


Offline
 Profile  
 
 Post subject: Re: FYI: ex-SR SD-40's going to scrap
PostPosted: Thu May 10, 2012 2:31 pm 

Joined: Sun Aug 22, 2004 1:51 pm
Posts: 12167
Location: Somewhere east of Prescott, AZ along the old Santa Fe "Prescott & Eastern"
http://www.railpictures.net/viewphoto.php?id=397344

According to the caption, more awaiting where those two came from.


Offline
 Profile  
 
 Post subject: Re: FYI: ex-SR SD-40's going to scrap
PostPosted: Thu May 10, 2012 2:35 pm 

Joined: Fri Apr 27, 2012 6:30 pm
Posts: 226
Yikes. I hope some museum is able to buy and restore one of these to Southern livery.

_________________
Tony Held


Offline
 Profile  
 
 Post subject: Re: FYI: ex-SR SD-40's going to scrap
PostPosted: Thu May 10, 2012 5:02 pm 

Joined: Sun Aug 22, 2004 1:51 pm
Posts: 12167
Location: Somewhere east of Prescott, AZ along the old Santa Fe "Prescott & Eastern"
A photo on Facebook shows several more of the high-hoods lined up and ready for shipment outside one of the Altoona Shops building: https://fbcdn-sphotos-a.akamaihd.net/hp ... 1910_n.jpg

Image


Offline
 Profile  
 
 Post subject: Re: FYI: ex-SR SD-40's going to scrap
PostPosted: Fri May 11, 2012 10:58 pm 

Joined: Sun Aug 22, 2004 1:51 pm
Posts: 12167
Location: Somewhere east of Prescott, AZ along the old Santa Fe "Prescott & Eastern"
Internet chatter is suggesting that the second unit from the right is 1580, the first N&W SD40, and there are insinuations that requests for its preservation are being made, potentially at Mad River & NKP. Lots of "thay should donate em all 2 museeums" fluff, but a serious assessment would suggest only a few good candidates as potential recipients in SR and/or N&W turf, many of whom already have some big power (N&W 1776 at Roanoke, for example) or might not really be able to handle an SD40 (SCRRM, Savannah).....


Offline
 Profile  
 
 Post subject: Re: FYI: ex-SR SD-40's going to scrap
PostPosted: Sat May 12, 2012 12:35 am 

Joined: Tue Jul 05, 2011 1:18 am
Posts: 198
At least a Southern one should be preserved. I think NS should donate one of the 2 class units to a museum at least. Isn't the youngest Southern SD preserved an SD7 from the early 50's at the VMoT? Prime reason for a workhorse like the 3170 to go to the TVRM.


Offline
 Profile  
 
 Post subject: Re: FYI: ex-SR SD-40's going to scrap
PostPosted: Sat May 12, 2012 1:28 pm 

Joined: Fri Sep 12, 2008 5:56 pm
Posts: 185
Location: Norwalk, Ohio
Hadn't heard anything about Bellevues Mad River & NKP wanting the #1580 ? It would be nice though as the #1580 and her sisters 81,82,83 were all Bellevue,Ohio engines for quite sometime used on the hump paired with 2 slugs.They were at Bellevue from at least 1992 when i hired out there and maybe even several years before that up until a few years back when they were replaced by some rebuilt #6100 units.In the early 1990's if they were short of power they would grab one of the 4 and send it out on the local L36 from Bellevue to South Lorain particulary the 1583 as i remember many a nights on that one! I later got to run a few of them when i was on the engineer extra board when called for the hump job.

Those high hood SD-40's were good old engines and over the years i had a few others on some road jobs on coal trains and they were good pullers.It would be nice to see a few saved somewhere even if they are stuffed and mounted.


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: