| Railway Preservation News https://www.rypn.org/forums/ |
|
| Tandy PCC Parts https://www.rypn.org/forums/viewtopic.php?f=1&t=33552 |
Page 1 of 1 |
| Author: | Harry Nicholls [ Sun Jul 08, 2012 8:23 pm ] |
| Post subject: | Tandy PCC Parts |
The second list of parts from the Tandy #5 are now on the web site for North Texas Transport. You may see the original list and the new list at http://www.northtexastransport.org/Surp ... alvage.pdf http://www.northtexastransport.org/Surp ... lvage2.pdf |
|
| Author: | RCD [ Mon Jul 09, 2012 8:22 pm ] |
| Post subject: | Re: Tandy PCC Parts |
Any photos of the heaters? |
|
| Author: | Harry Nicholls [ Mon Jul 09, 2012 8:39 pm ] |
| Post subject: | Re: Tandy PCC Parts |
If you mean electric heaters from inside the car, there are none. This is a stripped body on the inside that was getting ready for a new paint job when the project was cancelled. We do have a MG set which is not out from under the car. It will be available as soon as we clear the car underside. All other under body parts, controller, compressor, etc., will be taken out later this month. Right now, we will have to concentrate on cutting up the GE switch box to be able to have access to the under side. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|