| Railway Preservation News https://www.rypn.org/forums/ |
|
| Nathan parts needed for restoration project https://www.rypn.org/forums/viewtopic.php?f=1&t=3367 |
Page 1 of 1 |
| Author: | J. David [ Sun Jun 23, 2002 4:57 am ] |
| Post subject: | Nathan parts needed for restoration project |
Greetings: I am in need of a water regulating valve handle (complete) and a heater cock handle for a Nathan No. 6 Monitor injector. The water handle was also used on the No. 51A boiler tester. I have drawings covering these parts, but would prefer to use originals rather than make reproductions if possible. I am also looking for a filling plug, two regulating valve stems (with handles) and two covers for the auxiliary oil cups for a Nathan Double sight feed (tube type) hydrostatic lubricator. I realize that these are odd parts and quite obsolete, but would appreciate you rummaging around in your miscellanious parts boxes to see if you might by chance have any of the above spare and for sale. Thank you. J. David P.S. Thanks to those of you who have helped with my search for gauges (see posting of 19 June 2002), but thus far no suitable ones have shown up (read: keep looking!) JDC jdconrad@snet.net |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|