| Railway Preservation News https://www.rypn.org/forums/ |
|
| Baldwin 26 https://www.rypn.org/forums/viewtopic.php?f=1&t=34403 |
Page 1 of 14 |
| Author: | m3ohwell [ Sun Jan 20, 2013 7:00 pm ] | ||||
| Post subject: | Baldwin 26 | ||||
At Steamtown today, Baldwin 26 restoration moving right along, assembly of boiler to frame, and driver's starting soon, completion sometime in the summer! Ed K. OH WELL PRODUCTIONS / HORNS INC. http://www.dieselairhorns.com
|
|||||
| Author: | m3ohwell [ Sun Jan 20, 2013 7:02 pm ] | ||||
| Post subject: | Re: Baldwin 26 | ||||
Baldwin 26. Ed K.
|
|||||
| Author: | 6-18003 [ Sun Jan 20, 2013 9:24 pm ] |
| Post subject: | Re: Baldwin 26 |
This little engine sure has gotten the royal treatment. |
|
| Author: | Mgoldman [ Sun Jan 20, 2013 11:55 pm ] |
| Post subject: | Re: Baldwin 26 |
They've had that engine in restoration for so long I was kind of hoping, like the Reading did with their 2-8-2's, maybe we'd see it rebuilt as something a little more powerful. Like a 4-10-2. Lol. Glad to see some progress. Hope your Summertime estimate holds steam. /Mitch |
|
| Author: | Mark Z. Yerkes [ Mon Jan 21, 2013 9:32 pm ] |
| Post subject: | Re: Baldwin 26 |
As do I. I'm potentially doing an internship up there this summer, and it would be really nice to be there when it first gets under steam. |
|
| Author: | tomgears [ Tue Jan 22, 2013 9:33 am ] |
| Post subject: | Re: Baldwin 26 |
There are few locomotives today that will be rebuilt to this level. |
|
| Author: | stephenpiwowarski [ Tue Jan 22, 2013 9:10 pm ] |
| Post subject: | Re: Baldwin 26 |
I remember visiting steamtown for the second time in 1996. This was the first time I had seen the new roundhouse and museum, which were all pretty memorable to me as a 10 year-old. Most memorable was going up into the cab of 26 and being invited to step on the air pedal and add a shovelful to the firebox. I already had a serious interest in steam locomotives, but that was perhaps the most memorable experience I've had on a steam locomotive, even though I've worked on many others since then. I look forward to seeing 26 back in the near future so that other children can experience the same awe that I once did. Steve |
|
| Author: | Mark Z. Yerkes [ Wed Jan 30, 2013 9:33 pm ] |
| Post subject: | Re: Baldwin 26 |
Update: 26 is apparently being "re-wheeled" tomorrow. |
|
| Author: | Joshua K. Blay [ Wed Jan 30, 2013 9:56 pm ] |
| Post subject: | Re: Baldwin 26 |
Thanks for the update Mark- helped clean her frame 10 years ago during my all too brief volunteer summer so I too am looking forward to her return. Joshua |
|
| Author: | tim o'm [ Thu Jan 31, 2013 3:32 pm ] |
| Post subject: | Re: Baldwin 26 |
The frame was lifted off the wooden blocks today, and placed on the axles this morning around 8 AM. Here is what I was able to capture.  Lifting the frame with the overhead crane was easy, but placing it on all six drive boxes took up most of the time. Slow adjustment of all the parts within the tight tolerances of the straightened frame took a lot of coordination of the crew.  At the same time, one worker was inside Baldwin 26's fire box, in preparation for her eventual move to the chassis.  Three men worked inside the frame, and watched as it settled in on the drive boxes. They also were bolting in the binders to hold the drive boxes in the frame.   As the crane lowered the frame, jacks were put in place on the ends of the frame. This will soften the "landing" as it were, when all responsibility falls on the wheels.  This is a big step forward in the long rebuild of this 0-6-0 from 1929.  Still a lot more needs to be done to the engine before she leaves the Steamtown shop under her own power. |
|
| Author: | Frisco1522 [ Thu Jan 31, 2013 3:39 pm ] |
| Post subject: | Re: Baldwin 26 |
Check all the spring rigging and stuff. Now's the time to find something in the wrong place or upside down. Just sayin............... |
|
| Author: | whodom [ Thu Jan 31, 2013 5:54 pm ] |
| Post subject: | Re: Baldwin 26 |
I'll bet that job is a whole lot easier with the boiler off the frames like that. Of course, it may just make it easier to spot the upside down spring or whatever... |
|
| Author: | Afboone [ Thu Jan 31, 2013 8:46 pm ] |
| Post subject: | Re: Baldwin 26 |
They will be working the spring rigging before the boiler goes on. Should be next week. What a job getting the binders in. |
|
| Author: | John Risley [ Fri Feb 01, 2013 1:27 pm ] |
| Post subject: | Re: Baldwin 26 |
Thanks for the great pics. Exciting when after all the work that nobody ever sees gets to the point where the big pieces are ready to put back on. Cheers, John. |
|
| Author: | superheater [ Sun Feb 03, 2013 1:53 am ] |
| Post subject: | Re: Baldwin 26 |
In the last year or so before this engine was removed from service, there was a little kid of three or four years of age that visited every Saturday, it seemed. He found the 26 to be rather fascinating and would inevitably be towing (not kidding, the little guy looked like he could take a spot with some huskies in Alaska) a woman I presume to have been his mother, and was memorable in that he called the engine "fluffy the Baldwin". He would be almost frantic as the engine pulled out and I seem to recall a brief conversation with the woman where she was slightly apologetic about the boy's youthful perceptions and extraordinary enthusiasm. It was a rather useful thing to think how different a small child's perceptions are from an adult's, including his imputation of a personality to an inanimate object. I guess the kid would be in his late teens now, I wonder if he remembers those Saturdays. |
|
| Page 1 of 14 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|