| Railway Preservation News https://www.rypn.org/forums/ |
|
| Triple Valve Schematic Required https://www.rypn.org/forums/viewtopic.php?f=1&t=34547 |
Page 1 of 1 |
| Author: | k5ahudson [ Wed Feb 13, 2013 11:16 pm ] | ||
| Post subject: | Triple Valve Schematic Required | ||
I'm looking for a schematic for the triple valve pictured below. I do not know the model number, but it is off a 2800 series ex-Long Island Railroad coach. If anyone could help me out it would be appreciated.
|
|||
| Author: | Adam Phillips [ Thu Feb 14, 2013 3:58 am ] |
| Post subject: | Re: Triple Valve Schematic Required |
Looks to me to be NYAB 26-C. Not sure if I have any prints but I'm sure I don't have them scanned. They still have some parts for those if I'm not mistaken. |
|
| Author: | Mike Tillger [ Thu Feb 14, 2013 6:27 am ] |
| Post subject: | Re: Triple Valve Schematic Required |
Check out the top link on the RPCA Library page:http://www.rpca.com/resourcelibrary.htm Mike Tillger |
|
| Author: | Loco112 [ Tue Mar 18, 2014 3:55 pm ] |
| Post subject: | Re: Triple Valve Schematic Required |
Does anyone have a photo or a line drawings sketch of the modernized K1 (quick action, quick release, quick everything) triple valves (the ones with diaphrams and/or poppet valves, but not piston rings)? I am hoping that WABCO made a K1 triple valve with poppet valves, like the 6K Distribution valve uses. Thanks |
|
| Author: | nevans1133 [ Tue Mar 18, 2014 4:06 pm ] |
| Post subject: | Re: Triple Valve Schematic Required |
Check this link, hope it helps: http://techinfo.wabtec.com/DataFiles/O& ... 5,S.24.pdf |
|
| Author: | Loco112 [ Wed Mar 19, 2014 12:11 am ] |
| Post subject: | Re: Triple Valve Schematic Required |
After reading it, thats not it, but being into the old small brakes, I'm not sure what that part is, so it had a chance to be the right one. Thanks for posting! What I need is a modernized K1 triple valve that will still bolt onto the 8" x 12" KC or KD freight brakes. Maybe it was China or one of the WABCO Austral-Asia countries that was using that "unicorn" of a triple valve. I call it a "unicorn" becasue it probably doesn't exist! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|