| Railway Preservation News https://www.rypn.org/forums/ |
|
| On the 3 Axle with 3 motor 1600 HP https://www.rypn.org/forums/viewtopic.php?f=1&t=35318 |
Page 1 of 1 |
| Author: | Owen S. Paulsen [ Fri Jul 19, 2013 7:55 pm ] |
| Post subject: | On the 3 Axle with 3 motor 1600 HP |
Hi Fellow; An a RSX-4 MRS1 the 3 Axle an 3 motor the space for rail could 4'8 1/2",5'0",5'3",an 5'6". This axle an frame should have the same distantly an similar for just standard gauge which 1600 HP. http://www.rr-fallenflags.org/manual/manual.html Then ALCo Truck Maintenance Manual http://www.rr-fallenflags.org/manual/MI-1010.pdf The look at 1600 HP with 3 Axle and 3 motor. Do anybody measure the space between the 3 Axle and see if the spaced to (1) Axle to middle (2) Axle is 6'-11" the loading pad and from middle Axle to (3) Axle it 5'-7" with has swivel plate. I need distant from swivel plate to middle (2)Axle an 5'-7" to see I can use standard gauge instead multi-gauge,I also need see where load pad from middle (2) Axle in 6'-11". This could save money: No buy long Axle. Get roller bear,Do not that box a modify. I do not Traction motors, The unit equipment type 5GE731F1. The for complete except Traction motor. I need to know the 1600 HP and 3 motor is O.K., an Where,What type Locomotive that on. Stan |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|