Railway Preservation News
https://www.rypn.org/forums/

Commonwealth trucks on DRS-6-6-1500, AS-616, H16-66
https://www.rypn.org/forums/viewtopic.php?f=1&t=35356		 Page 1 of 1
Author:  fltenwheeler [ Sat Jul 27, 2013 5:35 pm ]
Post subject:  Commonwealth trucks on DRS-6-6-1500, AS-616, H16-66
Hi All

I am drawing up the Commonwealth trucks used on Baldwin DRS-6-6-1500, AS-616, and early Fairbanks Morris H16-66 locomotives for use on a 1/8 scale locomotive.

I am looking for drawings or photographs of un-mounted trucks. Or if someone is close to one of the serving Baldwin’s a couple of measurements would be a great help. The length and height of the side frame would get me in the right ballpark. I have the axle spacing.

The size of the holes in the side frame would be an added bonus.

Thanks for any help:

Tim Meyer

Attachments:
Commonwealth Truck 800.jpg
Commonwealth Truck 800.jpg [ 29.33 KiB | Viewed 4936 times ]
Author:  Pat Fahey [ Sat Jul 27, 2013 7:27 pm ]
Post subject:  Re: Commonwealth trucks on DRS-6-6-1500, AS-616, H16-66
Hi Tim
I did find a photo for you , it is out of The Second Diesels Spotter's Guide put out by Kalmbach Books . Pat.
Attachment:
File comment: From Diesel's Spotter's Guide
Commonweath Trucks.jpg # 2.jpg
Commonweath Trucks.jpg # 2.jpg [ 127.23 KiB | Viewed 4859 times ]
Author:  twofoot [ Sat Jul 27, 2013 9:07 pm ]
Post subject:  Re: Commonwealth trucks on DRS-6-6-1500, AS-616, H16-66
here

Image
Author:  twofoot [ Sun Jul 28, 2013 12:26 am ]
Post subject:  Re: Commonwealth trucks on DRS-6-6-1500, AS-616, H16-66
Moar.

Image
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/