I'm in search of drawings for a Baldwin power reverse gear. I need drawings for the crosshead type (Type C). Can anybody help out? See pic below.
Thanks
Clinch670
| Attachments: |
|
image.jpg [ 116.7 KiB | Viewed 3803 times ] |
| Railway Preservation News https://www.rypn.org/forums/ |
|
| Baldwin/ragonett power reverse drawings https://www.rypn.org/forums/viewtopic.php?f=1&t=37667 |
Page 1 of 1 |
| Author: | clinch670 [ Fri Feb 06, 2015 8:12 pm ] | ||
| Post subject: | Baldwin/ragonett power reverse drawings | ||
I'm in search of drawings for a Baldwin power reverse gear. I need drawings for the crosshead type (Type C). Can anybody help out? See pic below. Thanks Clinch670
|
|||
| Author: | Dick_Morris [ Sat Feb 07, 2015 6:34 am ] |
| Post subject: | Re: Baldwin/ragonett power reverse drawings |
In collecting drawings and tech data for the restoration of Alaska Railroad #557 I tracked down a copy of the 1938 parts and instruction manual that covers BLW Type "T" and "C" power reverse gears and I have a scan of it. I think we have some Ragonett information as well. We just finished the overhaul of our Type "C" and I can also give you a source where we got replacement piston cups. Send me a PM with your email address. |
|
| Author: | Frisco1522 [ Sat Feb 07, 2015 10:43 am ] |
| Post subject: | Re: Baldwin/ragonett power reverse drawings |
I can tell you from experience that you want new cups and spares. Don't ask me how I know this. |
|
| Author: | J.B.Bane [ Sat Feb 07, 2015 9:23 pm ] |
| Post subject: | Re: Baldwin/ragonett power reverse drawings |
Sumpter Valley 19 and 20 have the type T that were added when on the WP&Y. I ordered new cups some time back which were just 10" Wabco brake cups. Not sure if anything had been modified for it to use these. I am sure we would love to have a set of drawings on file for ours. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|