Railway Preservation News
https://www.rypn.org/forums/

Wilmington & Western RR Update
https://www.rypn.org/forums/viewtopic.php?f=1&t=38582		 Page 1 of 1
Author:  tomgears [ Sun Sep 20, 2015 6:13 pm ]
Post subject:  Wilmington & Western RR Update
Things have been very busy at the Wilmington and Western. A very exciting happening is our B&O SW-1 No. 8408 is nearing completion offsite at McHugh Locomotive & Crane where she has received extensive restoration. Look for a more detailed report on her in the near future. Onsite, work is progressing on our 0-6-0 No. 58, she was jacked up to remove the front set of drivers, all of her tires are being replaced, and work continues on her 1472-day boiler inspection. We had a film crew and talent from the BBC filming for a documentary, and we got a coat of primer on a former Clinchfield Railroad foreman's car used for storage. Thanks to J.C. McHugh, Tim Cronin, Cristian Sanchez-Rosado, and Steven Jensen Jr. for the photos.

Attachments:
12006348_10205010464882002_7923975344887507493_n.jpg
12006348_10205010464882002_7923975344887507493_n.jpg [ 59.56 KiB | Viewed 7474 times ]
11249232_10205011635991279_1241757544854723070_n.jpg
11249232_10205011635991279_1241757544854723070_n.jpg [ 60.4 KiB | Viewed 7474 times ]
WWRR 58 Jacked Up 2015-09-15b.jpg
WWRR 58 Jacked Up 2015-09-15b.jpg [ 99.18 KiB | Viewed 7474 times ]
WWRR 58 Jacked Up 2015-09-15 a.jpg
WWRR 58 Jacked Up 2015-09-15 a.jpg [ 98.2 KiB | Viewed 7474 times ]
11209559_10204660574543335_9131404742458154683_n(1).jpg
11209559_10204660574543335_9131404742458154683_n(1).jpg [ 67.24 KiB | Viewed 7474 times ]
11924906_871515669630475_5645031153838970855_n.jpg
11924906_871515669630475_5645031153838970855_n.jpg [ 58.18 KiB | Viewed 7474 times ]
IMG_20150915_200320813.jpg
IMG_20150915_200320813.jpg [ 52.53 KiB | Viewed 7474 times ]
IMG_20150913_155222827.jpg
IMG_20150913_155222827.jpg [ 94.09 KiB | Viewed 7474 times ]
11988637_877033382412037_4746356219140079198_n.jpg
11988637_877033382412037_4746356219140079198_n.jpg [ 72.48 KiB | Viewed 7474 times ]
Author:  softwerkslex [ Sun Sep 20, 2015 7:08 pm ]
Post subject:  Re: Wilmington & Western RR Update
I am confused. Some photos show drivers being rolled out but others show tires being replaced with drivers on engine.
Author:  LV95068 [ Sun Sep 20, 2015 7:33 pm ]
Post subject:  Re: Wilmington & Western RR Update
The #2 and #3 axle tires were removed with the drivers still in the frame. #1 axle drivers were removed from the frame, as it was thought to be easier to remove the axle rather than crosshead guides, crossheads, etc. Once the jacks were set it wasn't any trouble to run them up higher after the #2 and #3 tires were off.
Author:  tomgears [ Sun Sep 20, 2015 8:43 pm ]
Post subject:  Re: Wilmington & Western RR Update
One other thing I wanted to mention is that the W&W now has a join online option on the website. Please consider joining, we have a lot of amazing stuff going on and 2016 will mark our 50th birthday. Members are the backbone of our half century of operation and being a member for 2016 could get you invited to some pretty awesome events.

https://www.dynamicticketsolutions.com/ ... enewal.cfm
Author:  bigjim4life [ Mon Sep 21, 2015 9:32 am ]
Post subject:  Re: Wilmington & Western RR Update
tomgears wrote:
We had a film crew and talent from the BBC filming for a documentary, and we got a coat of primer on a former Clinchfield Railroad foreman's car used for storage.


If you're allowed to say, what BBC documentary/show? Too bad it's not for Top Gear *sniff...sad*
Author:  Kimball [ Tue Sep 22, 2015 8:27 pm ]
Post subject:  Re: Wilmington & Western RR Update
I thought it was standard practice to turn the tire tread etc. to finished size after it was back on the wheel? These must be finished machined all over? Maybe this is a practice acceptable for low speed locos, like this switcher? Just curious, thanks!
Author:  QJdriver [ Thu Sep 24, 2015 12:29 am ]
Post subject:  Re: Wilmington & Western RR Update
That switcher cab is way nicer, cleaner, and more original than anything I've ever seen in my entire life !!! Does it have that new car smell ??? You guys better put some big floor mats on the running boards so nobody tracks mud on the floor.

Please don't feed the switchmen...
Author:  tomgears [ Thu Sep 24, 2015 7:06 am ]
Post subject:  Re: Wilmington & Western RR Update
I think the show is Great Railway Journeys.

It is my understanding that tires can be profiled either before or after they are installed onto the wheel. They do need to have a finish bore to a specification for the interference fit. I don't have the information in front of me at the moment but I think it is about 0.056 interference for engine No. 58's tires.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/