| Railway Preservation News https://www.rypn.org/forums/ |
|
| EMD control panel https://www.rypn.org/forums/viewtopic.php?f=1&t=42886 |
Page 1 of 1 |
| Author: | Bob D. [ Wed Jan 02, 2019 1:57 pm ] | |||
| Post subject: | EMD control panel | |||
I am repurposing an old EMD panel for a fun project. The backside is populated with Otto microswitches. The switches show the contact arrangement but nothing else. Would anyone happen to know the electrical ratings of these switches? Voltage and amperage ratings? The wiring was all #10 which indicates pretty robust contacts. Thanks, Bob D.
|
||||
| Author: | Bob D. [ Mon Jan 14, 2019 2:03 pm ] | ||
| Post subject: | Re: EMD control panel | ||
Does anyone know of a source for replacement numbered plastic strips that are used for throttle and dynamic brake position indicators on these EMD panels? New or used. Thanks, Bob D.
|
|||
| Author: | TrainDetainer [ Mon Jan 14, 2019 5:50 pm ] |
| Post subject: | Re: EMD control panel |
Have you talked to Larry's Truck or any other rebuilders? |
|
| Author: | Walker Smith RRW [ Mon Jan 14, 2019 6:36 pm ] |
| Post subject: | Re: EMD control panel |
Powerrail Distribution rebuilds those second generation control stands. I feel sure they have a source of both new and used plastic indicator strips. https://www.epowerrail.com Hope this helps, - Walker |
|
| Author: | Bob D. [ Tue Jan 15, 2019 9:06 am ] |
| Post subject: | Re: EMD control panel |
Thanks for the suggestions. Bob |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|