| Railway Preservation News https://www.rypn.org/forums/ |
|
| gauge repair service needed https://www.rypn.org/forums/viewtopic.php?f=1&t=43790 |
Page 1 of 1 |
| Author: | Rick A [ Sun Oct 06, 2019 9:09 pm ] |
| Post subject: | gauge repair service needed |
I know someone who is looking to have vintage gauges restored to working order. Anybody know anyone? Thanks |
|
| Author: | Bowmore [ Sun Oct 06, 2019 10:00 pm ] |
| Post subject: | Re: gauge repair service needed |
are you talking about air pressure, water pressure or steam pressure? I have a place near me in CA that does repairs. I found it almost easier to find replacements on eBay. |
|
| Author: | Bad Order [ Mon Oct 07, 2019 8:00 am ] |
| Post subject: | Re: gauge repair service needed |
What company would some actual steam operator, like Union Pacific or Strasburg, have calibrate their steam pressure gauges? I'm sure that the FRA regs spell out how they have to qualify them before use. You're not going to find an era appropriate calibrated steam gauge on ebay.... Along those lines... 20 years ago I bought two Crosby steam gauge testers. I hooked one up to a big steam pressure gauge and got it to operate the gauge. It had a tool to pull needles off their stems to enable repostioning them. Sold them both on ebay, for BIG money. So, someone out there has the means to test gauges... but would they themselves have to be qualified by some agency to "qualify" your gauge? |
|
| Author: | MD Ramsey [ Mon Oct 07, 2019 10:18 am ] |
| Post subject: | Re: gauge repair service needed |
As Information, FRA requirements regarding Steam Gauges in 49 CFR Part 230: https://www.ecfr.gov/cgi-bin/text-idx?SID=bc1d41d66209950e435e09d9a66b78f0&mc=true&node=pt49.4.230&rgn=div5#sg49.4.230_141.sg7 Mike Ramsey |
|
| Author: | Kelly Anderson [ Mon Oct 07, 2019 12:15 pm ] |
| Post subject: | Re: gauge repair service needed |
. |
|
| Author: | Rick A [ Mon Oct 07, 2019 3:36 pm ] |
| Post subject: | Re: gauge repair service needed |
Thank you for your responses. He has some old gauges and I believe he needs them rebuilt from the inside out. New springs,glass, etc. he's working on restoring an old steam boat. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|