Railway Preservation News
https://www.rypn.org/forums/

CSS&SB #1 gets a new roof
https://www.rypn.org/forums/viewtopic.php?f=1&t=47458
Page 1 of 1

Author:  Macowiec [ Tue Jun 27, 2023 4:54 am ]
Post subject:  CSS&SB #1 gets a new roof

This was posted on the Southern Michigan Railroad Facebook page yesterday:

Attachment:
355865267_653864056780153_2223685039339996042_n.jpg
355865267_653864056780153_2223685039339996042_n.jpg [ 500.04 KiB | Viewed 3997 times ]

Attachment:
356402271_653864133446812_1917925878895840807_n.jpg
356402271_653864133446812_1917925878895840807_n.jpg [ 622.28 KiB | Viewed 3997 times ]


Certainly an unusual approach to such a project.

The SMR commented: "We chose a metal roof to preserve the car without the maintenance required for softer roofing materials."

Author:  Overmod [ Tue Jun 27, 2023 9:47 am ]
Post subject:  Re: CSS&SB #1 gets a new roof

Is that a standing-seam metal roof with a central ridge cap, like the roof system used on a building?

Author:  wilkinsd [ Tue Jun 27, 2023 12:06 pm ]
Post subject:  Re: CSS&SB #1 gets a new roof

Why build a carbarn when you can take your carbarn with you?

Author:  John Risley [ Tue Jun 27, 2023 12:22 pm ]
Post subject:  Re: CSS&SB #1 gets a new roof

"This is just temporary.............unless it works"! {quote by Red Green}.

May look funny, but if it kept the rain out it served its purpose I think. Regards, John.

Author:  Scranton Yard [ Tue Jun 27, 2023 2:24 pm ]
Post subject:  Re: CSS&SB #1 gets a new roof

Is this an in-service car? If so, how do standing-seam roof systems hold up to flexing and vibration?

Author:  PMC [ Tue Jun 27, 2023 5:35 pm ]
Post subject:  Re: CSS&SB #1 gets a new roof

There is a black material that comes in rolls, with four initials I can't remember (something like HDMA), that has been proven successful on car roofs, I wonder if that would really be more maintenance intensive than this steel roof, or as expensive? Anything is better than letting water slowly destroy the interior, but maybe even roll roofing would be easier to deal with.

Author:  Howard P. [ Tue Jun 27, 2023 6:35 pm ]
Post subject:  Re: CSS&SB #1 gets a new roof

EPDM is the "rubber roofing" stuff; it's a membrane that is applied over a wood roof deck.
The underlying wood roof must be in excellent condition; it looks like this car has a rather poor wood deck. That would have to be properly repaired, and that is a major carpentry job.

Properly done, an EPDM over wood roof deck will last a long time. RMNE has a coach with a 12 year old EPDM roof, and the car hasn't had a drop of water in it during that time.

Howard P.

Author:  Dave [ Wed Jun 28, 2023 8:19 am ]
Post subject:  Re: CSS&SB #1 gets a new roof

Put EPDM on Charlotte Trolley 85 back about 1987 and still going strong.

Author:  SD70dude [ Wed Jun 28, 2023 5:31 pm ]
Post subject:  Re: CSS&SB #1 gets a new roof

The rolled EPDM is awesome stuff. We've had really good results with it, one car is approaching 30 years with the same roof. For the last few freight or work cars we've been able to patch bad spots and then simply add a layer of plywood as a base.

The rolled asphalt also has the potential to last for many years but you need to make sure to seal the seams and edges very well. Our flanger had this stuff but it had only been nailed on, and after a few years it started peeling and leaking in several spots, one of which allowed water to enter beside one corner of the cupola and eventually caused major structural damage.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/