Railway Preservation News
https://www.rypn.org/forums/

This guy made his own high-rail excavator
https://www.rypn.org/forums/viewtopic.php?f=1&t=49388
Page 1 of 1

Author:  dwa2503107 [ Sun Nov 15, 2026 7:56 pm ]
Post subject:  This guy made his own high-rail excavator

Don't try this at home, kids!

https://www.youtube.com/watch?v=zDHrJ4-5lqQ

Attachments:
rider_1024x1024.png
rider_1024x1024.png [ 1.34 MiB | Viewed 2715 times ]

Author:  Alexander D. Mitchell IV [ Mon Nov 16, 2026 1:29 am ]
Post subject:  Re: This guy made his own high-rail excavator

If this guy put even one-tenth of his energy into building things like this for hard-up excursion operations or museums that he puts into "clickbait" for "going viral," he'd be a hero.

Instead, it's all about garnering streaming revenue--which is how he gets the money to "play" like this. There are a couple other guys making some serious FB revenue by illegally trespassing on rail lines with jury-rigged or regular track "speeders." They've even developed their own cliché tropes--"where/what's he gonna break THIS time? Where's he gonna fish and not catch anything?" etc. .......

Others in the comments and elsewhere have criticized 1) his fabrication design and techniques ("I did all the research and tried to learn how to weld cast iron....." Sheesh.....), and 2) the build quality of the "Chinese junk" he bought for cheap on an online auction (such as don't trust the "oil" they put in the hydraulics; flush it all out and put REAL hydraulic oil in it.....).

Have any of you ever encountered a trespassing homebuilt speeder operator on your trackage? The one I know about was someone who jury-rigged a car out of a spare mower engine, gears, car wheels, and plywood a week or two after the official "final run" of NARCOA members on the West Shore RR west of Lewisburg, Pa. before the line was taken up for a trail. The cart crashed broadside into a car at a crossing, putting two people on the cart into the hospital and resulting in a couple charges.......

It would be most interesting to see any such adaptive rebuilds done by rail preservationists who KNOW what they're doing--anything from mounting things on a skid to pull behind a hy-rail truck to building vegetation trimmers, fire protection (as used on speeders on the C&TS and elsewhere), etc. and then link those videos to the ones by "hacks" like this guy and show folks the safe(r) way REAL railroad folks operate.

Author:  jrevans [ Tue Nov 17, 2026 12:45 am ]
Post subject:  Re: This guy made his own high-rail excavator

Alexander D. Mitchell IV wrote:
It would be most interesting to see any such adaptive rebuilds done by rail preservationists who KNOW what they're doing--anything from mounting things on a skid to pull behind a hy-rail truck to building vegetation trimmers, fire protection (as used on speeders on the C&TS and elsewhere), etc. and then link those videos to the ones by "hacks" like this guy and show folks the safe(r) way REAL railroad folks operate.


The "East Coast Railroaders Group" on Facebook, have been uniquely equipping a hi-rail Dodge Durango with various custom mounted cutting equipment, to clear the line towards Cape May, NJ I believe.

Here's their FB site:
https://www.facebook.com/EastCoastRailroaders/

I attached a FB picture of the vehicle

Attachments:
File comment: East Coast Railroaders Group brush cutting vehicle
ECRG_vehicle.jpg
ECRG_vehicle.jpg [ 264.85 KiB | Viewed 1988 times ]

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/