It is currently Tue Aug 25, 2026 8:47 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Bullet Nose Betty
PostPosted: Fri May 23, 2003 12:58 pm 

Canada does not have the only cone-nosed 4-8-2s. Check out this JA in New Zealand.

http://abpr.railfan.net/abprphoto.cgi?october02/10-19-02/STEAM_JA1211_Gloria_at_Napier_19OCT2002.jpg
ryarger@rypn.org


  
 
 Post subject: another photo
PostPosted: Fri May 23, 2003 1:01 pm 

http://abpr.railfan.net/abprphoto.cgi?october02/10-19-02/STEAM_JA1211_Gloria_near_Clive_19OCT2002.jpg
ryarger@rypn.org


  
 
 Post subject: better one
PostPosted: Fri May 23, 2003 1:13 pm 

http://abpr.railfan.net/abprphoto.cgi?october02/10-20-02/J1211_Gloria_at_Westshore_20OCT2002.jpg
ryarger@rypn.org


  
 
 Post subject: Re: Bullet Nose Betty
PostPosted: Fri May 23, 2003 1:24 pm 

> Canada does not have the only cone-nosed
> 4-8-2s. Check out this JA in New Zealand.

I'm strangely... thirsty. ;)


Wowak.Railfan.Net
mrwowak@yahoo.com


  
 
 Post subject: in the cab
PostPosted: Fri May 23, 2003 1:31 pm 

http://abpr.railfan.net/abprphoto.cgi?october02/10-22-02/J1211_inside_the_cab_Napier_20OCT2002.jpg
ryarger@rypn.org


  
 
 Post subject: Re: Bullet Nose Betty
PostPosted: Fri May 23, 2003 1:45 pm 

> Canada does not have the only cone-nosed
> 4-8-2s. Check out this JA in New Zealand.

These were pretty cool engines. Note that they have Baker valve gear, some of the very few engines outside of the U.S. to be so equipped.

Good Steaming,
Hugh

The Ultimate Steam Page
whodom2001@yahoo.com


  
 
 Post subject: New Zealand.
PostPosted: Fri May 23, 2003 2:51 pm 

Bob;

I lived in Wellington, New Zealand in about 1990. This locomotive is more impressive in person than even on those great pictures.

The amount of steam was incredible; from working Climaxes to quite a few 4-8-4s. (the sounds of one accellerating from a stop in Lower Hutt could be leard all over the valley)

Interestingly, I had finished spending some time firing the ex. CPR G5a pacific #1201; the firing controls were almost exactly the same, only the cabs were smaller. :-) I did have the offer to join the local "mainline" society and work their locomotives, but had to decline for family reasons. Now, I wished that I had joined...

I also went to a few "A&P" shows, hit-n-miss gas engines, flying Tiger Moths, and of course, steam traction engines galore. Old cars were abundant; from the old Morris's with the "flick up the indicator" turning signals, to one lady who still went for groceries in her old Model "A" down in Greymouth. Wooden spoked wheels and hand cranked. Honest.

New Zealanders are a tough, resourceful people; more than able to tend for their locomotives.

I came back from there with my eyes opened wide...

John Stewart
Ottawa, Canada.

> Canada does not have the only cone-nosed
> 4-8-2s. Check out this JA in New Zealand.


Ottawa CMST Shay
freewrl-1@rogers.com


  
 
 Post subject: Re: New Zealand.
PostPosted: Mon May 26, 2003 5:48 am 

Hi All,

I spent many, many hours working on J1211 in the 1990's both as a coal burner and later when converted to a oil burner. The J class locos and more so the Ja class were known for there turn off speed, on 54" drivers speed up and above 70mph use to be common on the express passenger trains. Not to bad for a "narrow" gauge railway (3'6" gauge)

Jeffrey

h2ogas@hotmail.com


  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: