Railway Preservation News
https://www.rypn.org/forums/

Water level indicator
https://www.rypn.org/forums/viewtopic.php?f=1&t=6000
Page 1 of 1

Author:  BobK [ Fri Jun 06, 2003 8:29 pm ]
Post subject:  Water level indicator

Who has upgraded their tender to the new FRA regs adding water level indicators. Has anyone done anything different than just a plastic water column?

Author:  David M. Wilkins [ Fri Jun 06, 2003 8:39 pm ]
Post subject:  Re: Water level indicator

We used a pipe with holes drilled every 6 inches or so, I forgot the exact distance, it has been a while. Ours went right into the place where the original L&N one went.

david.wilkins@bardstown.com

Author:  Scott Wickert [ Fri Jun 06, 2003 10:52 pm ]
Post subject:  Re: Water level indicator

We used sight-glasses and valves made by Ernst Flow Industries. They offer tons of different glasses and valves...also fusible plugs. The water tank sight-glass we went with has bronze valves and looks at home on the loco tank. The local FRA inspector was very happy with it. Our boiler backhead has two of their "reflex" style glasses rated for steam pressure. They have worked quite well.

Here is the web address....

www.ernstflow.com

Scott Wickert
Oregon Coast Explorer


steamlokie@harborside.com

Author:  J. David [ Sat Jun 07, 2003 11:29 am ]
Post subject:  Re: Water level indicator

At The Valley, we installed four little brass petcocks at varying levels at the front of the cistern adjacent to the coal pocket: simple, effective and cheap.
J.David


jdconrad@snet.net

Author:  Kevin McCabe [ Mon Jun 09, 2003 2:31 am ]
Post subject:  Re: Water level indicator

> We used a pipe with holes drilled every 6
> inches or so, I forgot the exact distance,
> it has been a while. Ours went right into
> the place where the original L&N one
> went.

Same for Frisco 1630 at IRM--easy and cheap!

Kevinmccabe@avenew.com

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/