| Railway Preservation News https://www.rypn.org/forums/ |
|
| UT test https://www.rypn.org/forums/viewtopic.php?f=1&t=6486 |
Page 1 of 1 |
| Author: | buddy bob [ Fri Aug 01, 2003 11:40 am ] |
| Post subject: | UT test |
Hi all some people think that a UT test can't find a weld that has less than full penatration. There for you most remove some patches to check. imo. this is unnessary a good ut tester /person can find less than full penatration welds. You can do this by grinding a flat spot on the seem and then doing a test say every 4" or so this will tell if you have a good weld or not. I do onthis old old boxes doesen't everyone else? regards bb. staybolt2@netscape.net |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|