| Railway Preservation News https://www.rypn.org/forums/ |
|
| Superheater Boiler Flues https://www.rypn.org/forums/viewtopic.php?f=1&t=7078 |
Page 1 of 1 |
| Author: | dave [ Fri Oct 03, 2003 9:08 am ] |
| Post subject: | Superheater Boiler Flues |
Hello. I wanted to poll the readers of RYPN to find out if any of you new of a reliable source for replacement Superheater Boiler Flues. I am seeking 5 1/2" OD x 3/16 x 14' in either SA-172 or SA-192. I have contacted Anderson as well as the Boiler Tube Company of America. If anyone has other reliabile sources, please let me know. Thanks in advance for your assistance. dh dave@hensarling.org |
|
| Author: | BobK [ Fri Oct 03, 2003 12:16 pm ] |
| Post subject: | Re: Superheater Boiler Flues |
Try Senior Boiler tube. They have swedging capabilities as well. http://www.suppliersonline.com/supplier ... div_id=558 I have found that Anderson had the better prices though. |
|
| Author: | Ray Dewley [ Fri Oct 03, 2003 12:45 pm ] |
| Post subject: | Re: Superheater Boiler Flues |
Try Karay Metals in Woodstock, NY. They list up to 5" for A179 & A192. They may be able to source 5-1/2" tubes(?) If you haven't yet, go to www.thomasregister.com and type "boiler tubes" into the search box. Karay Metals |
|
| Author: | Tim Andrews [ Fri Oct 03, 2003 1:29 pm ] |
| Post subject: | Re: Superheater Boiler Flues |
> We have gone to Anderson the last couple of times we have needed tubes. They in turn have sourced the tubes from a German company. TVRM has then swaged the tubes. I know we have also combined orders with other steam locomotive owners to get better pricing. Tim Andrews TVRM tandrews@tvrail.com |
|
| Author: | Tom Gears [ Fri Oct 03, 2003 2:16 pm ] |
| Post subject: | Re: Superheater Boiler Flues |
Call Potts Welding here in Delaware. They are a major supplier of boiler tubes and seem to have everything. I have been in the boiler business for over 20 years and they have never let me down. Tom Potts Welding and Boiler Repair |
|
| Author: | jason sobczynski [ Fri Oct 03, 2003 8:41 pm ] |
| Post subject: | Re: Superheater Boiler Flues |
While there are several suppliers I have been told there are actually only twp real sources. The first is american made tubes through any one of many suppliers. These are rolled and welded and of a modern composition. The second is the German tubes through Anderson. The material composition used is closer to the "original stuff" than anything made in america, they are SEAMLESS and much cheaper than domestic tubes even after you factor in the shipping. jasonsobczynski@yahoo.com |
|
| Author: | ge13031 [ Sat Oct 04, 2003 7:32 am ] |
| Post subject: | Re: Superheater Boiler Flues ...suggestion |
Stick with seamless tubing if you can afford it. It is much less like to fail and if it does fail it gives you a short defect at the angle of the piercing mill instead of a long rip down the weld. The German mills (Krupp and Thyssen) were always our biggest competitors, way underselling USSLorain product. lamontdc@adelphia.net |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|