| Railway Preservation News https://www.rypn.org/forums/ |
|
| Alco PA project https://www.rypn.org/forums/viewtopic.php?f=1&t=7352 |
Page 1 of 1 |
| Author: | Ted Miles [ Fri Oct 31, 2003 12:04 am ] |
| Post subject: | Alco PA project |
Have not seen anything about either the engine in Portland? or the one at the Smithsonian? Can you direct me to a web site or news article? Ted Miles ted_miles@nps.gov |
|
| Author: | Greg Ramsey [ Fri Oct 31, 2003 12:34 am ] |
| Post subject: | Re: Alco PA project |
I visited the Brooklyn Roundhouse last month. Both PAs are there and are on wheels. The Smithsonian one was out side with most of its sheetmetal in place, but still in primer. I have a few pics of it at home but I'm on the road for another week. The Nickel Plate one is inside and the prime mover is inside, but it still needs to be fitted to the frame. It was way to dark and cramped inside the roundhouse to get much in the way if images. Greg > Have not seen anything about either the > engine in Portland? or the one at the > Smithsonian? > Can you direct me to a web site or news > article? > Ted Miles greg@cscvrr.org |
|
| Author: | Brendan G [ Fri Oct 31, 2003 1:34 am ] |
| Post subject: | Re: Alco PA project |
> Can you direct me to a web site or news > article? Try nkp190.com. Hope the link works. nkp190 |
|
| Author: | Ted Miles [ Fri Oct 31, 2003 12:47 pm ] |
| Post subject: | Re: Alco PA project |
Thanks for the web site info; I would never have found it. ted_miles@nps.gov |
|
| Author: | Ted Miles [ Fri Oct 31, 2003 12:48 pm ] |
| Post subject: | Re: Alco PA project |
Thanks for the web site info; I would never have found it by myself. ted_miles@nps.gov |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|