Railway Preservation News
https://www.rypn.org/forums/

Travel Town's Locomotive Pavilion *PIC*
https://www.rypn.org/forums/viewtopic.php?f=1&t=7637		 Page 1 of 1
Author:  Greg [ Sun Nov 30, 2003 5:25 pm ]
Post subject:  Travel Town's Locomotive Pavilion *PIC*
It has been almost 2 years since construction started, and 12 years since the project was supposed to have started, but there is light at the end of the tunnel and the dedication is only a few weeks away.

Volunteers at the Travel Town Museum in Los Angeles started moving equipment around this past weekend in preparation. Both operating locomotives, the EMD Model 40 "Charlie Atkins" and the California Western's Baldwin RS-12 #56 were used and were assisted by the nicknamed "TT #2", our Case skiploader.

We'll post the offical press release for the dedication as soon as it's available.

Greg Ramsey

Travel Town Museum
Image
greg@cscvrr.org
Author:  Greg [ Sun Nov 30, 2003 5:29 pm ]
Post subject:  Re: Travel Town's Locomotive Pavilion
Doesn't look like the link I posted for the image works, so here is a direct link the a folder with several images from this weekend.

Greg

http://www.geocities.com/atsfm177/Thank ... 004images/


Travel Town Museum Locomotive Pavilion Images
greg@cscvrr.org
Author:  Rick [ Sun Nov 30, 2003 9:55 pm ]
Post subject:  Re: Travel Town's Locomotive Pavilion
What did it cost to build that shelter?

Rick

rick@todengine.org
Author:  Ted Miles [ Sun Nov 30, 2003 11:16 pm ]
Post subject:  Re: Travel Town's Locomotive Pavilion
I visited Travel Townn last summer and saw the building in progress. Whatever it cost it will be worth it; protecting a fleet of historic steam engines, cars and equipment.

There is an 1860s engine there that has got to be quite rare and a steam dummy from San Francisco that is one of only three in the USA.

Good to seemore equipment under cover.

Ted Miles


ted_miles@nps.gov
Author:  Greg Ramsey [ Mon Dec 01, 2003 1:30 am ]
Post subject:  Re: Travel Town's Locomotive Pavilion
> What did it cost to build that shelter?

> Rick

At one time it was budgeted at $1.2 Million. I know it went up due to redesigns due to new seismic rules, and other hoops that City buildings have to comply with. But I haven't kept up with the money side of the construction. It has been enough fun to make sure we got water and air piping where we wanted it, and we got the right size electrical outlets and dozens of other little details.

I'm sure all of the details will come out in the press packets that will be available in a few weeks.

Greg


greg@cscvrr.org
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/