| Railway Preservation News https://www.rypn.org/forums/ |
|
| Sources for Fusible Plugs? https://www.rypn.org/forums/viewtopic.php?f=1&t=7809 |
Page 1 of 1 |
| Author: | Marty Knox [ Wed Dec 17, 2003 7:05 pm ] |
| Post subject: | Sources for Fusible Plugs? |
We have always bought out fusible plugs from Ernst gage, (now Ernst Flow Products)but they have informed us that their supplier, Consolidated Brass, has discontinued them. Does anyone have another source? Martyhuck@aol.com |
|
| Author: | buddy bob [ Wed Dec 17, 2003 9:03 pm ] |
| Post subject: | Re: Sources for Fusible Plugs? |
> We have always bought out fusible plugs from > Ernst gage, (now Ernst Flow Products)but > they have informed us that their supplier, > Consolidated Brass, has discontinued them. > Does anyone have another source? Hi please advise size. Are they outside plugs? bb |
|
| Author: | Ryan Scott [ Wed Dec 17, 2003 9:30 pm ] |
| Post subject: | Re: Sources for Fusible Plugs? |
Marty- Check out the link. I bought some of these about a year ago. Had to use a local distributer, but the info is here. I believe I went to the home page to find contact information, and then they gave me a local distributer to buy from. http://www.conbraco.com/products/ph/tec ... pid=28-400 Hope this helps. Ryan Scott lima709@aol.com |
|
| Author: | Jim Templin [ Wed Dec 17, 2003 10:36 pm ] |
| Post subject: | Re: Sources for Fusible Plugs? |
Steller Industrial Technologies www.stellaritco.com 740 654 7052 |
|
| Author: | Marty Knox [ Thu Dec 18, 2003 12:12 am ] |
| Post subject: | Re: Sources for Fusible Plugs? |
> Hi please advise size. Are they outside > plugs? bb We use both 1/2" and 3/4", and both fireside and waterside. The fireside are used in our 1920 Baldwin 4-6-0, and the water side are used in our mill boilers. Martyhuck@aol.com |
|
| Author: | R.L.Musser [ Thu Dec 18, 2003 10:17 am ] |
| Post subject: | Re: Sources for Fusible Plugs? |
Hi Marty, We use Ernst & Whitney Pressure Products, Inc. in Waynesboro, Pa.. Phone # 1-717-762-7332. You can also ask for their catalog. Rick rick@strasburgrailroad.com |
|
| Author: | John E. Rimmasch [ Sun Dec 21, 2003 1:09 am ] |
| Post subject: | Re: Sources for Fusible Plugs? |
>The 2472 (SP 4-6-2)guys at Hunters Point SF Cal. have the original SP drawings for fusible plugs and they are more than happy to share drawings and info. They also have some good study info and some tips on making them last longer. Contact me via phone for more info. John E. Rimmasch CMO/Ohio Central Steam Department Heber Valley Railroad In Utah at: (435)-654-5601 EXT 105 or e-mail jrimmasch@yahoo.com Hi Marty, > We use Ernst & Whitney Pressure > Products, Inc. in Waynesboro, Pa.. Phone # > 1-717-762-7332. You can also ask for their > catalog. > Rick jrimmasch@yahoo.com |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|