| Railway Preservation News https://www.rypn.org/forums/ |
|
| Journal pads https://www.rypn.org/forums/viewtopic.php?f=1&t=8107 |
Page 1 of 1 |
| Author: | Dustin Bachtell [ Tue Jan 13, 2004 11:31 am ] |
| Post subject: | Journal pads |
Does any one of the name of a supplier of journal pads? I need 16 #8's and our supply is down to 3!! Any help would be most appriciated. bachtell4@lisco.com |
|
| Author: | johnb [ Tue Jan 13, 2004 12:33 pm ] |
| Post subject: | Re: Journal pads |
> Does any one of the name of a supplier of > journal pads? I need 16 #8's and our supply > is down to 3!! Any help would be most > appriciated. Try Unity Railway Supply Co., 630-595-4562 shaymech@hotmail.com |
|
| Author: | James F. Boylan [ Thu Jan 15, 2004 2:19 pm ] |
| Post subject: | Re: Journal pads |
I'm trying to track down the Hennessy Mfg. Co. of Chambersburg, Pa. and pass the information along to this group. The founder made his fortune using the "latteral motion" (slight side to side play) of steam locomotive drivers to power mechanical lubricators. The decendents diversified into "Slidewell" boxcar door openers (a large hand wheel driving a gear down a rack) and journal box lubricator pads, optionally pre-lubricated! TyburnRR@cs.com |
|
| Author: | Pete [ Fri Jan 16, 2004 4:32 am ] |
| Post subject: | Re: Journal pads |
> Try Unity Railway Supply Co., 630-595-4562 try: http://www.unityrailway.com/ |
|
| Author: | Bob Kutella [ Fri Jan 16, 2004 6:52 am ] |
| Post subject: | Re: Journal pads |
> I'm trying to track down the Hennessy Mfg. > Co. of Chambersburg, Pa. and pass the > information along to this group. Hennessey pads are no longer available - for some years now. Along with other fallen flags of lube pads including Atlas, Premier, Journapack. The pads from Unity are like wooly sheep, with foam packing inside the sewn cloth bag and are available pre oiled or dry. We like them dry since the oil seems to start the clock ticking on the foam breaking down and disintegrating. It is a little more work to install the dry pad and you have to keep topping up the journal as the initial oil is absorbed, but the shelf life of a new pad is much greater. Only certain 'standard' sizes are available so we continue to wind wool yarn into 'waste bundles' and hand pack journals on some equipment. Bob Kutella 68trolley@comcast.net |
|
| Author: | Paul D [ Fri Jan 16, 2004 10:36 am ] |
| Post subject: | Re: Journal pads |
It is a > little more work to install the dry pad and > you have to keep topping up the journal as > the initial oil is absorbed, You may want to read the AAR Lubrication Manual. It has instructions on soaking new pads before installation. It's important that the fibers are saturated with oil before you put pressure on them otherwise you may not get good lubrication across the whole pad. pfdx@aol.com |
|
| Author: | James F. Boylan [ Fri Jan 16, 2004 3:39 pm ] |
| Post subject: | Re: Journal pads |
> Hennessey pads are no longer available - for > some years now. Mike Hennessy just returned my call. He closed the Railway Parts business in 1995, and is now a consultant in the same town, Chambersburg, Pa. >The pads from Unity are like > wooly sheep, with foam packing inside the > sewn cloth bag So, that's why we liked Hennessy's product better - Unity's disintegrated for NHIR, also! TyburnRR@cs.com |
|
| Author: | Bob Kutella [ Sat Jan 17, 2004 8:09 am ] |
| Post subject: | Re: Journal pads |
> You may want to read the AAR Lubrication > Manual. It has instructions on soaking new > pads before installation. It's important > that the fibers are saturated with oil > before you put pressure on them otherwise > you may not get good lubrication across the > whole pad. Well, we do soak and squeeze new dry pads before installing, maybe even starting the day before. I took that as a given, and did not mean to omit that step. That is what I referred to as being more work with the use of a dry pad. Bob Kutella 68trolley@comcast.net |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|