| Railway Preservation News https://www.rypn.org/forums/ |
|
| Need a source for Superheater Return Bends Type A https://www.rypn.org/forums/viewtopic.php?f=1&t=8794 |
Page 1 of 1 |
| Author: | Mike Tillger [ Mon Mar 08, 2004 11:07 pm ] |
| Post subject: | Need a source for Superheater Return Bends Type A |
Can anyone recommend a good source for Type A return bends? We need approximately 75 return bends. Thanks for any information. Mike T RCT&HS web site mtillger@adelphia.net |
|
| Author: | jason sobczynski [ Mon Mar 08, 2004 11:58 pm ] |
| Post subject: | Re: Need a source for Superheater Return Bends Typ |
You could try interlok in poland, their about $40 ea if i remember correctly. Also, David Conrad. jasonsobczynski@yahoo.com |
|
| Author: | Don Wirth [ Tue Mar 09, 2004 12:27 am ] |
| Post subject: | Re: Need a source for Superheater Return Bends Typ |
Contact Robert Franzen at Grand Canyon Ry. frisco1522@sbcglobal.net |
|
| Author: | Kelly [ Tue Mar 09, 2004 9:16 am ] |
| Post subject: | Re: Need a source for Superheater Return Bends Typ |
The Strasburg Rail Road has over 300 Type A return bends in stock, fresh from the foundry. They are lost wax cast SA-216 WCA steel with certification. You can e-mail me, or call 717-687-8421. Strasburg Rail Road kelly@strasburgrailroad.com |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|