| Railway Preservation News https://www.rypn.org/forums/ |
|
| C&NW GP7/9 elec prints https://www.rypn.org/forums/viewtopic.php?f=1&t=9138 |
Page 1 of 1 |
| Author: | Bob Yarger [ Wed Jan 07, 2004 9:05 am ] |
| Post subject: | Re: Exchange program |
Please understand I was just kidding. Really though, the conditions railway workers face in China probably aren't much better (and in some ways are worse) than my great grandfather faced at the turn of the century. In that respect, it could be a true trip back in time. ryarger@rypn.org |
|
| Author: | Ryan Scott [ Wed Mar 17, 2004 10:59 pm ] |
| Post subject: | C&NW GP7/9 elec prints |
This might be out there, but I though this group might have some leads on this. I am looking for electrical prints for the GP7/9's that went through C&NW's rebuild program in the 1970s. I have two of these locomotives on the roster and no electrical prints to go with them. Both are ex UP GP9 locomotives that were sold to the C&NW with out prime movers. They were re-engined by the C&NW with EMD 567B engines (had 567C originally), and reclassified as GP-7's (which explains the GP9 tag that is still attached to the 711). Both were rewired, and I belive this is when the 777 lost it's dynamic brake equipment. Both retain their original control stand and 24RL brakes, but both recieved new radiator cores. I'm not sure when the short hoods were chopped (I would rather have the high hoods personally) The GSMR 711 (frame #5320-14) was built as UP 218, then C&NW 4380 The GSMR 777 (frame #5362-15) was built as UP 277, then C&NW 4382 I would also be interested in any other pictures or information on these locomotives. Thanks! Ryan Scott lima709@usadaily.net |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|