Railway Preservation News
https://www.rypn.org/forums/

Duff-Norton
https://www.rypn.org/forums/viewtopic.php?f=1&t=9392
Page 1 of 1

Author:  BobK [ Sun Apr 11, 2004 2:02 pm ]
Post subject:  Duff-Norton

Not Duff Beer.

Anyone know if parts are still available for the Duff-Norton 100 ton air jacks? Or does anyone have a blown jack that they would sell some parts off of?

Thanks

Author:  Ray Dewley [ Sun Apr 11, 2004 2:14 pm ]
Post subject:  Re: Duff-Norton, etc

Try the link below. They appear to still in business.

Or you can call a company local to me who may be able to help.

John the Jackman & Co Inc
112 W Stafford Rd
Stafford Springs, CT 06076-1012
Phone: (860) 684-3545



Duff-Norton

Author:  Terry K. [ Mon Apr 12, 2004 6:37 pm ]
Post subject:  Re: Duff-Norton

> Not Duff Beer.

> Anyone know if parts are still available for
> the Duff-Norton 100 ton air jacks? Or does
> anyone have a blown jack that they would
> sell some parts off of?

> Thanks

We (Pacific Railroad Preservation Assoc.) own two Duff-Norton 100 ton air jacks. We purchased them through our local RR supply vendor who is R.B. Hornberger Co. railroad supply, in Forest Grove, Oregon (close to Portland). We recently had one of them rebuilt (due to lack of lubrication/water in air) through Hornberger so parts are still available. You can contact Dan Hornberger at 503.357.8931. He had called me a while back asking if we were interested in more. Don't know if he still has them. You can tell him Terry with the PRPA referred you.

prpa@sps700.org

Author:  Pete [ Mon Apr 12, 2004 11:44 pm ]
Post subject:  Re: Duff-Norton

> Not Duff Beer.

> Anyone know if parts are still available for
> the Duff-Norton 100 ton air jacks? Or does
> anyone have a blown jack that they would
> sell some parts off of?

> Thanks

http://www.duffnorton.com

Click on Products->Jacks. The 100 ton one appears to be listed.

Author:  Brian Norden [ Tue Apr 13, 2004 12:57 am ]
Post subject:  Re: Duff-Norton - R.B. Hornberger

R. B. Hornberger is a second generation railroad tools, assessories, etc. supply firm. In the past they have represented a number of firms dealing with track tools, track hardware, car hardware (windows and hinges) and the like.

When the father operated the firm it was located in the San Francisco Bay area. I have been aware of the firm for more than 25 years.

Brian Norden


bnorden49@earthlink.net

Author:  Rich [ Wed Apr 14, 2004 9:14 am ]
Post subject:  Re: Duff-Norton

With Duff-Norton, I don't know how much you need in parts, but there is a 200-500 dollar minimum order. Or at least there was one, about 2 years ago, when I tried to get a spring for a short 5 ton ratchet jack. Unfortunatly they did not tell me about there being a service center / part supplier on the other side of the CT/RI border

Good luck
Rich

Connecticut Eastern Railroad Museum
crij5519@earthlink.net

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/