Railway Preservation News
https://www.rypn.org/forums/

2 cyl shay at kinzer pa.
https://www.rypn.org/forums/viewtopic.php?f=1&t=9620
Page 1 of 1

Author:  buddy bob [ Sun May 09, 2004 8:41 am ]
Post subject:  2 cyl shay at kinzer pa.

hello recently there was discussion about the 2 cyl. shay at the steam show at kinzer ,pa. i went to the spring steam up and the track gauge is 30" not 24" also the gears did come from a truck rear end, the loco type boiler came from a factory and has 3" tubes. when working hard a lot of coal fired ends up in the smoke box and must be cleaned out.all in all for a home made loco made on the cheap, it runs good and looks ok. if they can do it so can you. regards bb

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/