| Railway Preservation News https://www.rypn.org/forums/ |
|
| Franklin Fire Door https://www.rypn.org/forums/viewtopic.php?f=2&t=40149 |
Page 1 of 1 |
| Author: | Jersey steam [ Sat Dec 24, 2016 10:35 am ] |
| Post subject: | Franklin Fire Door |
I am looking for engineering drawings (not the parts list drawings) for the Franklin Fire Door No. 9 (oval clamshell type). I have to make patterns for this part. I can measure the ones on the locomotive but having good drawings always helps. Bernie |
|
| Author: | Loco112 [ Mon Dec 26, 2016 8:01 pm ] |
| Post subject: | Re: Franklin Fire Door |
I investigated those and was told that the Franklin archive was destroyed. You could scan it with a 3D scanner add that with some hand measuring and come up with an accurate set of drawings. I plan to make a solid model file set for a couple of the smaller Franklin's and an Economy fire doors. My plans is to scan, scan, scan. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|