| Railway Preservation News https://www.rypn.org/forums/ |
|
| Wanted: Repair Gauge for Kunkle Fig.1 valve https://www.rypn.org/forums/viewtopic.php?f=2&t=44471 |
Page 1 of 1 |
| Author: | Richard Stratford [ Fri May 15, 2020 5:00 am ] |
| Post subject: | Wanted: Repair Gauge for Kunkle Fig.1 valve |
Looking for template gauges to re-machine valve and valve seat on 2" Kunkle Figure1 safety valves. Also, dimensioned drawings of the gauges, or of the valve and seat could assist this repair. Thanks RJS. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|