Looking for a source for these. This one is on a CR N21 cab. Two per door.
| Attachments: |
|
Image5236206014866607263.jpg [ 187.57 KiB | Viewed 5772 times ] |
| Railway Preservation News https://www.rypn.org/forums/ |
|
| ISO caboose door latch https://www.rypn.org/forums/viewtopic.php?f=2&t=44962 |
Page 1 of 1 |
| Author: | hytwr1 [ Mon Oct 19, 2020 10:17 am ] | ||
| Post subject: | ISO caboose door latch | ||
Looking for a source for these. This one is on a CR N21 cab. Two per door.
|
|||
| Author: | Doug Debs 2472 [ Mon Oct 19, 2020 8:05 pm ] |
| Post subject: | Re: ISO caboose door latch |
This is very close to the sort of handle ("dog") used on some marine watertight doors and watertight hatch covers. Examples occasionally surface on eBay. - Doug Debs |
|
| Author: | hytwr1 [ Mon Oct 19, 2020 9:46 pm ] |
| Post subject: | Re: ISO caboose door latch |
Doug Debs 2472 wrote: This is very close to the sort of handle ("dog") used on some marine watertight doors and watertight hatch covers. Examples occasionally surface on eBay. - Doug Debs Cool! Thanks for the info. Will keep an eye out. |
|
| Author: | Al Stangenberger [ Tue Oct 20, 2020 12:22 am ] |
| Post subject: | Re: ISO caboose door latch |
Looks like a swinging bar latch. McMaster-Carr has one #1250a21 https://www.mcmaster.com/catalog/126/3088 Not sure if its dimensions are quite right for your application. They have another (1249a11) which also has an inside handle. |
|
| Author: | hytwr1 [ Sat Oct 24, 2020 12:28 pm ] |
| Post subject: | Re: ISO caboose door latch |
Al Stangenberger wrote: Looks like a swinging bar latch. McMaster-Carr has one #1250a21 https://www.mcmaster.com/catalog/126/3088 Not sure if its dimensions are quite right for your application. They have another (1249a11) which also has an inside handle. Looks like a winner! Thanks for the heads-up. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|