It is currently Fri Jun 05, 2020 8:17 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 38 posts ]  Go to page Previous  1, 2, 3
Author Message
 Post subject: Re: Steam (returning/being restored/being rebuilt) in 2020
PostPosted: Thu May 14, 2020 1:31 pm 

Joined: Mon Mar 14, 2011 4:10 pm
Posts: 68
"Just the facts, Ma'am": When I saw GTW 4070 in the MRHF roundhouse a year ago, she was completely stripped, seriously rusted and it looked like nothing had been done on her in over 25 years. The driver set that had sat in the drop pit for decades - immersed in water- was inside the roundhouse. Unless some miracle has occurred in the last year, there is no progress being made. Please update this.......


Offline
 Profile  
 
 Post subject: Re: Steam (returning/being restored/being rebuilt) in 2020
PostPosted: Thu May 14, 2020 2:21 pm 

Joined: Sun Dec 28, 2014 11:12 pm
Posts: 149
NKP779 wrote:
"Just the facts, Ma'am": When I saw GTW 4070 in the MRHF roundhouse a year ago, she was completely stripped, seriously rusted and it looked like nothing had been done on her in over 25 years. The driver set that had sat in the drop pit for decades - immersed in water- was inside the roundhouse. Unless some miracle has occurred in the last year, there is no progress being made. Please update this.......


Despite what you say; if you follow MRPS on Facebook you will see that they have been doing working on 4070 - bit by bit as time, money, and available volunteer hands become available.

Also you should cut them some slack. Look at everything they have on their plate to deal with. They are working on the roundhouse, turntable, trackage, and other projects - some of which are undertaken to pay the bills.


Offline
 Profile  
 
 Post subject: Re: Steam (returning/being restored/being rebuilt) in 2020
PostPosted: Thu May 14, 2020 4:02 pm 

Joined: Wed Dec 24, 2014 3:15 pm
Posts: 247
I’ve been following the MRPS (the group working in the cleveland roundhouse) on Facebook for a few years, and they’ve had a hodge podge of things that they’ve been doing for a few years now. From what I’ve heard, a lot of the lack of work on 4070 has been blamed on some of the older members and the entire “boys club” nature of it. Not sure who those members were/are, but that’s just what I’ve heard, so don’t quote me if I’m wrong because I probably am.

I have seen quite a bit of progress on other projects they’ve been up to, including working on track around the roundhouse, the roof of stalls 6-8, wiring, sewage, the turntable, and a few passenger cars they’ve been working on, etc. you get the idea. 4070 for a time just didn’t appear to be a priority because there are other pressing issues over at the site. Now more recently it does look like there is some major work being done on 4070, so only time will tell if this attempt of restoring 4070 will be successful (given I’ve seen actual photo progress, it’s already more successful than 7-8 years ago.)


Offline
 Profile  
 
 Post subject: Re: Steam (returning/being restored/being rebuilt) in 2020
PostPosted: Thu May 14, 2020 10:03 pm 

Joined: Wed Sep 06, 2017 11:33 am
Posts: 90
Steamguy73 wrote:
...From what I’ve heard, a lot of the lack of work on 4070 has been blamed on some of the older members and the entire “boys club” nature of it...


Exactly why I worry someday the guys who made the Tiger King series on Netflix will someday start poking around in railroad preservation... to many "good old boys clubs" and dramatic rivalries between organizations and individuals. I am glad to hear the group in question with 4070 seems to be moving beyond that with progress on their engine and roundhouse site... but trust me the "good old boys clubs" nature of a lot of operations is someday going to bite preservation in the rear.


Offline
 Profile  
 
 Post subject: Re: Steam (returning/being restored/being rebuilt) in 2020
PostPosted: Fri May 15, 2020 1:33 am 

Joined: Wed Aug 05, 2015 8:46 am
Posts: 20
Location: Altoona, PA
Since someone asked, this is where the K4 Project was a year ago:

Image

Tender was sandblasted prior to primer. I drew up digital files for letting the tender in the wider c.1946 format, from which disposable stencils were cut in a low-tack vinyl. Paint and clear coat were ordered, but the weather turned cold before any top coat was applied. With things as they are right now in the world, everything is on hold. I haven't been in to my usual spot at the archive desk since early March, let alone anything for this project (and I live across town).


Offline
 Profile  
 
 Post subject: Re: Steam (returning/being restored/being rebuilt) in 2020
PostPosted: Fri May 15, 2020 1:39 am 

Joined: Wed Aug 05, 2015 8:46 am
Posts: 20
Location: Altoona, PA
In other news, we can add East Broad Top 2-8-2s 14 and 16 to the list, as the EBT Foundation appears to have designated them as the first to run. Both locomotives have undergone asbestos abatement in stall 8.

From the EBT Facebook page:
Image

16 was filled with water for the first time since late March of 1956 (Christopher Brang photo):

Image


Offline
 Profile  
 
 Post subject: Re: Steam (returning/being restored/being rebuilt) in 2020
PostPosted: Fri May 15, 2020 12:33 pm 

Joined: Sun Aug 22, 2004 7:19 am
Posts: 5765
Location: southeastern USA
Recent good news from down under:

https://www.youtube.com/watch?v=FXo-6UvW3qk

_________________
Santayana: "He who does not remember the past is condemned to repeat it."
Corollary: "He who does is doomed to watch those who don't repeat it anyway."


Offline
 Profile  
 
 Post subject: Re: Steam (returning/being restored/being rebuilt) in 2020
PostPosted: Tue May 19, 2020 10:49 pm 

Joined: Mon Aug 23, 2004 9:04 am
Posts: 287
Location: Lawrence, Mass.
Good news from the Northwest Railway Museum, Northern Pacific 924 steams...

https://trainmuseum.blogspot.com/2020/0 ... teams.html

_________________
Richard Jenkins


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 38 posts ]  Go to page Previous  1, 2, 3

All times are UTC - 5 hours [ DST ]


 Who is online

Users browsing this forum: bbunge, choodude, CJKlossner, Google [Bot], R Paul Carey and 30 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: