It is currently Thu May 15, 2025 1:25 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 19 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: CNR 6069 Update 2014
PostPosted: Wed Nov 05, 2014 5:24 pm 

Joined: Sun Dec 30, 2007 1:12 am
Posts: 370
Location: canada
After a protracted delay, we were successful in opening up the coal doors and installing the cover plates on the coal bunker of 6069. Although this was not as she would have been in service, it was paramount that this coal bunker be covered as the weather was beginning to take a toll on the interior of the bunker and the stoker..

_________________
From the footplate,
Project 6069
engine6069@hotmail.com


Offline
 Profile  
 
 Post subject: Re: CNR 6069 Update 2014
PostPosted: Wed Nov 05, 2014 5:28 pm 

Joined: Sun Aug 22, 2004 11:26 am
Posts: 4709
Location: Maine
Thanks for that. Good call.

_________________
"It's only impossible until it's done." -Nelson Mandela


Offline
 Profile  
 
 Post subject: Re: CNR 6069 Update 2014
PostPosted: Sat Nov 08, 2014 4:40 pm 

Joined: Sun Dec 30, 2007 1:12 am
Posts: 370
Location: canada
Hoping for a last warm front to come through so I can get a coat of primer on the new roof cover...

Image



You can't even see it from the ground... perfect!

Image

_________________
From the footplate,
Project 6069
engine6069@hotmail.com


Offline
 Profile  
 
 Post subject: Re: CNR 6069 Update 2014
PostPosted: Sat Nov 08, 2014 7:07 pm 

Joined: Sun Aug 22, 2004 11:26 am
Posts: 4709
Location: Maine
Difficult to find a CNR steam loco with as beautiful lines and colors as these "Bullet Nose Betty's".

_________________
"It's only impossible until it's done." -Nelson Mandela


Offline
 Profile  
 
 Post subject: Re: CNR 6069 Update 2014
PostPosted: Sun Nov 09, 2014 10:53 am 

Joined: Sun Aug 22, 2004 5:58 pm
Posts: 1073
great idea for the cover.


Offline
 Profile  
 
 Post subject: Re: CNR 6069 Update 2014
PostPosted: Sun Nov 09, 2014 11:21 am 

Joined: Sun Dec 30, 2007 1:12 am
Posts: 370
Location: canada
First person to call it oil fired with the cover on will get coal in their stocking :) Thank's guy's, I am pleased how the cover turned out. We thought about using wood but given that she is outdoors in all weather it wouldn't last long.

_________________
From the footplate,
Project 6069
engine6069@hotmail.com


Offline
 Profile  
 
 Post subject: Re: CNR 6069 Update 2014
PostPosted: Sun Nov 09, 2014 11:47 am 

Joined: Sun Jun 17, 2007 8:03 pm
Posts: 1092
Location: Warszawa, Polska
Of course, putting shingles on the wood would protect it just like any roof.

_________________
CNR 6167 in Guelph, ON or "How NOT To Restore A Steam Locomotive"


Offline
 Profile  
 
 Post subject: Re: CNR 6069 Update 2014
PostPosted: Sun Nov 09, 2014 11:56 am 

Joined: Sun Dec 30, 2007 1:12 am
Posts: 370
Location: canada
That is why we chose steel.. shingles were never installed on a Locomotive ;)

_________________
From the footplate,
Project 6069
engine6069@hotmail.com


Offline
 Profile  
 
 Post subject: Re: CNR 6069 Update 2014
PostPosted: Tue Nov 11, 2014 8:57 pm 

Joined: Sun Dec 30, 2007 1:12 am
Posts: 370
Location: canada
http://thesarniajournal.ca/volunteers-find-secret-hidden-old-steam-engine/

_________________
From the footplate,
Project 6069
engine6069@hotmail.com


Offline
 Profile  
 
 Post subject: Re: CNR 6069 Update 2014
PostPosted: Fri Nov 14, 2014 12:07 pm 

Joined: Fri May 04, 2012 12:20 pm
Posts: 212
Location: Maine
Project-6069 wrote:

When I tried to go to that link my anti-virus protections blocked it as a malicious web site.


Offline
 Profile  
 
 Post subject: Re: CNR 6069 Update 2014
PostPosted: Fri Nov 14, 2014 12:23 pm 

Joined: Sun Dec 30, 2007 1:12 am
Posts: 370
Location: canada
No issues with the page...? does have some ads on there though that might cause that to happen?

_________________
From the footplate,
Project 6069
engine6069@hotmail.com


Offline
 Profile  
 
 Post subject: Re: CNR 6069 Update 2014
PostPosted: Sat Nov 15, 2014 5:50 pm 

Joined: Sun Aug 22, 2004 5:58 pm
Posts: 1073
worked OK for me


Offline
 Profile  
 
 Post subject: Re: CNR 6069 Update 2014
PostPosted: Sat Nov 15, 2014 6:02 pm 

Joined: Fri May 04, 2012 12:20 pm
Posts: 212
Location: Maine
This is what I get from Norton's:

http://thesarniajournal.ca/volunteers-f ... am-engine/



This is a known malicious web site. It is recommended that you do NOT visit this site. The detailed report explains the security risks on this site.


Offline
 Profile  
 
 Post subject: Re: CNR 6069 Update 2014
PostPosted: Sat Nov 15, 2014 6:20 pm 

Joined: Sun Dec 30, 2007 1:12 am
Posts: 370
Location: canada
No wonder your using nortons..

_________________
From the footplate,
Project 6069
engine6069@hotmail.com


Offline
 Profile  
 
 Post subject: Re: CNR 6069 Update 2014
PostPosted: Sun Nov 16, 2014 3:11 pm 

Joined: Tue Aug 24, 2004 6:30 am
Posts: 768
It worked fine for me.
The Sarnia Journal website is a reputable website. It is probably an ad on the page that is on a third party server.


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 19 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


 Who is online

Users browsing this forum: No registered users and 129 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: