It is currently Tue Aug 25, 2026 10:27 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Steam engine to Peabody, Mass.?
PostPosted: Tue Apr 19, 2005 8:44 am 

Joined: Sun Aug 22, 2004 9:35 am
Posts: 8139
Location: Wilton, NY
What engine is this? I'm guessing the dismantled ex-Simons Steel 0-6-0T that was once at Steamtown, sold when they moved to Pennsylvania?

http://www.ecnnews.com/cgi-bin/04/s/sst ... n-sedi0418


Offline
 Profile  
 
 Post subject: Re: Steam engine to Peabody, Mass.?
PostPosted: Tue Apr 19, 2005 10:03 am 

Joined: Thu Nov 25, 2004 11:35 am
Posts: 332
Location: Cortez, CO 81321
bobyar2001 said, "I'm guessing the dismantled ex-Simons Steel 0-6-0T that was once at Steamtown, sold when they moved to Pennsylvania?"

I'd say you're correct: http://lostengines.railfan.net/morelost.htm#Newbury

_________________
S. Roger Kirkpatrick, Cortez, CO - Gateway to Mesa Verde National Park


Offline
 Profile  
 
 Post subject: Re: Steam engine to Peabody, MA
PostPosted: Tue Apr 19, 2005 7:58 pm 
User avatar

Joined: Sun Aug 22, 2004 7:07 am
Posts: 1114
Location: Northeastern US
Good luck to them, hopefully the locomotive's owner will let her leave the yard this time.

_________________
http://www.restorationstories.com


Last edited by Stephen Hussar on Wed Apr 20, 2005 3:28 pm, edited 1 time in total.

Offline
 Profile  
 
 Post subject: Re: Steam engine to Peabody, MA
PostPosted: Wed Apr 20, 2005 10:06 am 

Joined: Sun Aug 22, 2004 11:26 am
Posts: 4773
Location: Maine
The little tank loco is said to have a very good boiler. I hope she is reassembled as the loco she was, rather than some zany, wild west, clown.

_________________
"It's only impossible until it's done." -Nelson Mandela


Offline
 Profile  
 
 Post subject: Re: Steam engine to Peabody, MA
PostPosted: Wed Apr 20, 2005 11:37 am 

Joined: Wed Apr 20, 2005 7:36 am
Posts: 14
I examined it a few years ago. The loco is complete but dismantled. The cab was savaged pretty bad when they took it abart. Also the tank had quite a bit of rust-through. As for the running gear. The drivers all need to be turned (if there is enough material left) The rods and valve gear were laying around on the ground so you know the bearings are pitted etc.

As for the boiler. Its basicly sound with the exception of a thinned out area under the front of the cab wall. The steam dome was the most alarming with quite heavy pitting and thining. Without running an ultra-sound we could not tell much about the crown sheet and general condition of the inside surfaces. I think the burner was still in place but I cannot remember though I do remember it being setup for oil fire with the brick lined pan etc.

The stack had a peice missing if I recall correctly.

I spoke with the owner of the yard. He was quite willing to work a deal. He originally purchased it to use as advertising for a resturant.

Its certainly savable but would not be easy.


Offline
 Profile  
 
 Post subject: Re: Junkyard Porter Pictures
PostPosted: Wed Apr 20, 2005 3:41 pm 
User avatar

Joined: Sun Aug 22, 2004 7:07 am
Posts: 1114
Location: Northeastern US
All, the loco was purchased by the junkyard owner from another person who bought her from Steamtown. She was to be used as an advertising gimmick at one of the junkyard owner's other business ventures, but not a restaurant. It was to be positioned ouside of Lee Speedway in Lee, NH with a sign that read "You're on the right track at Lee Speedway!" (no, I'm not kidding)

The deal fell through for the Speedway and the locomotive was brought to the junkyard where she sits today.

Everything that Terrence wrote is correct, all the major pieces are there, but sadly most oif them are badly deteriorated.

All Photos: John Stump

Image
Image
Image
Image

_________________
http://www.restorationstories.com


Offline
 Profile  
 
 Post subject: Re: Junkyard Porter Pictures
PostPosted: Thu Apr 21, 2005 7:48 am 

Joined: Wed Apr 20, 2005 7:36 am
Posts: 14
Thanks for jogging my memory. It was a race track!

Thanks for posting the photos.

We only got a couple of photographs of the locomotive due to a whole bunch of junk crowded in around it. There was simply no place to get a clear shot.


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: