It is currently Fri Oct 02, 2026 9:47 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: CPR 2860
PostPosted: Fri Aug 26, 2005 10:01 am 

Joined: Sun Aug 22, 2004 7:38 am
Posts: 1013
Location: Philadelphia
Just wanted to say I enjoyed the brief on the "Royal Hudson." Marvelous looking engine. It was good to be able to click on the smaller image and get a decent sized enlarged image I don't have it with me but there was an excellent TRAINS article from the 60s or 70s on the CME (is that what they called them in Canada?) of CPR during the time of the Jubilees and Hudsons. I know it doesn't matter worth beans but I wonder if 2860 might regain her CPR lettering and lose the BC plate on her front. Just a thought.Joshua, with images of 2816 and 2860 double-heading in my head.


Offline
 Profile  
 
 Post subject: Re: CPR 2860
PostPosted: Fri Aug 26, 2005 12:40 pm 

Joined: Fri Aug 27, 2004 7:57 am
Posts: 2599
Location: Faulkland, Delaware
It is good to see something positive is happening to this great old girl. It is interesting to read that she is getting front and rear tube sheet work and also some side sheet work and then go on to say the boiler is fine and it is a routine tube job. I guess major work is a matter of perspective.

_________________
Tom Gears
Wilmington, DE

Maybe it won't work out. But maybe seeing if it does will be the best adventure ever.


Offline
 Profile  
 
 Post subject: Re: CPR 2860
PostPosted: Fri Aug 26, 2005 11:39 pm 

Joined: Sun Aug 22, 2004 7:46 pm
Posts: 188
Gosh, what happened? Last I knew there were no funds to help the 2860 and she was parked at Squamish. This is wonderful news. Joshua, I share your vision of double-headed Hudsons.


Offline
 Profile  
 
 Post subject: Re: CPR 2860
PostPosted: Sat Aug 27, 2005 1:35 am 

Joined: Fri Sep 10, 2004 12:04 am
Posts: 6
Tom,Let me assure you that we take our stewardship of Royal Hudson #2860 very seriously. In approaching any project we adopt a positive attitude and proceed with caution realizing that this is serious business. We can certainly get enough negative feedback without trying very hard at all.Before we started on the work to 2860 we conducted an exhaustive survey of the locomotive, met with the regulatory authorities, reviewed existing documentation and drawings and had it looked over by an expert in the field. We have to conform to the regulations of Transport Canada which are very similar to the FRA regs, so we have to do it properly. One of our regs requires us to install an event recorder no less!We are very fortunate that the locomotive was very well maintained by Al Broadfoot and the BC Rail steam crew over the years and thus we are able to focus on the boiler work. The running gear and the tender are in very good condition. We will add the "black box", the diesel MU controls and other appliances required for operation on todays railroads.Thus far we have on hand the new tubes and flues and have ordered new superheaters and other small appliances that are needed.We hope to have the locomotive operational in 2006, although a firm date has yet to be determined.We welcome any and all suggestions and assistance that is offered and, of course, donations of hard cash are allways welcome.

_________________
Grant Ferguson


Offline
 Profile  
 
 Post subject: Re: CPR 2860
PostPosted: Sat Aug 27, 2005 11:16 am 

Joined: Mon Aug 23, 2004 11:07 am
Posts: 630
It wouldn't surprise me if a decision is made not to put the CP logo on the 2860 when it runs (maybe next year?) --- particularly if it runs on CN.How bout a simple "Royal Hudson" ?Bob H


Offline
 Profile  
 
 Post subject: Re: CPR 2860
PostPosted: Sun Aug 28, 2005 8:32 am 

Joined: Fri Aug 27, 2004 7:57 am
Posts: 2599
Location: Faulkland, Delaware
Grant,Thanks for the information and good luck with her restoration. Please keep us posted on her progress.

_________________
Tom Gears
Wilmington, DE

Maybe it won't work out. But maybe seeing if it does will be the best adventure ever.


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: