central oil burner - Howard

Dave · **Posted:** Wed Nov 30, 2011 4:32 pm

Suction? I thought the fuel was gravity fed.

dave

Nigel Anthony Hewer Day · **Posted:** Wed Nov 30, 2011 4:37 pm

Yes it mostly is but any suction and vacuum helps to keep an even distribution through the fuel gap.

Nigel Anthony Hewer Day · **Posted:** Thu Dec 01, 2011 12:37 am

Also the nearer 90 degree angle the fuel meets the stea the more risk there is of the steam blowing down the fuel gap and not letting the fuel out

M Austin · **Joined:** Sat Feb 05, 2005 1:05 am **Posts:** 488

FOR INFORMATION ONLY =
BABCOCK & WILCOX OIL SPRAYER PLATE FOR POWER PLANTS
HOLE SIZES DETERMINE FUEL FLOW FROM PRESSURES OF 5-50 PSI == ATOMIZING STEAM IS PACED 40 PSI HIGHER THAN FUEL PRESSURE

Attachment:

BWSPRAYERNOZZEL.jpg [ 63.07 KiB | Viewed 2866 times ]

Dave · **Posted:** Wed Dec 14, 2011 4:33 pm

Very interesting, Matt - almost like a paint spray gun.

Might you have a drawing for the standard US marine burner such as one would find on the O'Brien?

dave